Print Page   |   Contact Us   |   Sign In   |   Register
Webinar - System Design Series: System Design Parameters
Tell a Friend About This EventTell a Friend
 

7/14/2016
When: Thursday, July 14, 2016
2:00 - 3:00 PM EDT
Where: United States
Contact: Kelly LeCount
859-356-1030

« Go to Upcoming Event List  

 System Design Webinar Series:  Design a Better Finishing System
Sponsored by:
   Presented by:
   
 

 

This 3-part webinar series will provide an overview of critical system design considerations that must be taken into account when considering any type of finishing system. In addition, critical information regarding pretreatment, dry-off and curing will also be presented. Both batch and automated systems will be covered.


Presenters with expertise in finishing system design will share their knowledge and answer your questions. This is an important webinar if you are considering the installation of a new finishing system or upgrading an existing system. Whether you are painting or powder coating, you’ll walk away with valuable insight and tips for the best system to meet your needs.

The 3 webinars in this series are:

Webinar #1: System Design Parameters
Date:  July 14, 2016
Time:  2:00 PM EDT
Speakers:  John Sudges, Midwest Finishing Systems and Bruce Bryan, CCAI

Webinar #2: Pretreatment
Date:  September 8, 2016
Time:  2:00 PM EDT
Speakers:  Sam Woehler, George Koch Sons, LLC and Ken Kaluzny, Coral Chemicals

Webinar #3: Drying & Curing
Date:  November 3, 2016
Time:  2:00 PM EST
Speakers:  Brian Rozdilsky, Engineered Finishing Systems, John Podach, Fostoria Process Equipment, a dviision of TPI Corp.

Click here to register for Webinar #1 - System Design Parameters on July 14, 2016.  This webinar is FREE!

Registration for Webinar #2 & #3 will open up closer to the webinar dates.

Sponsorships Available!
Promote your company by becoming a Webinar Sponsor.  Complete information available by clicking here.