Print Page   |   Contact Us   |   Sign In   |   Register
Webinar - System Design Series
Tell a Friend About This EventTell a Friend
 

11/3/2016
When: Thursday, November 3, 2016
2:00 - 3:00 PM
Where: On-Line Webinar
United States
Contact: Kelly LeCount
859-356-1030

« Go to Upcoming Event List  

 System Design Webinar Series:  Design a Better Finishing System
Sponsored by:
   Presented by:
       

This 3-part webinar series will provide an overview of critical system design considerations that must be taken into account when considering any type of finishing system. In addition, critical information regarding pretreatment, dry-off and curing will also be presented. Both batch and automated systems will be covered.


Presenters with expertise in finishing system design will share their knowledge and answer your questions. This is an important webinar if you are considering the installation of a new finishing system or upgrading an existing system. Whether you are painting or powder coating, you’ll walk away with valuable insight and tips for the best system to meet your needs.

The 3 webinars in this series are:

Webinar #1: System Design Parameters - View the recorded webinar by clicking here!

Date:  July 14, 2016
Time:  2:00 PM EDT
Speakers:  John Sudges, Midwest Finishing Systems and Bruce Bryan, CCAI

Webinar #2: Pretreatment - View the recorded webinar by clicking here!
Date:  September 8, 2016
Time:  2:00 PM EDT
Speakers:  Sam Woehler, George Koch Sons, LLC and Ken Kaluzny, Coral Chemicals

Webinar #3: Drying & Curing
Date:  November 3, 2016
Time:  2:00 PM EST
Speakers:  Kevin Coursin, Engineered Finishing Systems, John Podach, Fostoria Process Equipment, a dviision of TPI Corp.
Click here to register for Webinar #3: Drying & Curing


 These webinars are FREE!