Custom Coater Directory Listing: Coatings Applied: Acrylics, Alkyd, Epoxy, ECTFE (ethylene,chlorotrifluoroethylene), ETFE(Ethylene, Tetrafluoroethylene), FEP(Fluorinated Ethylene Propylene), Fluoropolymers, Graphite, Molybdenum, Nylon, PAI polyamideimide), PEEK(polyaryletheretherketone), PES(Polyethersulfone), PFA(Perfluoroalkoxy), Polyester, Polyimide, Polyurethane, Powder Coatings, PPS (Polyphenylene Sulfide), PPS/PTFE, PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene Difluoride)[PVF2], Silicone, Silver, Torlon® with graphite. Coatings for: FDA(Food & Drug Administration), Mil Spec, USDA (U.S. Dept of Agriculture), UL (Underwriters Lab), NSF (National Sanitation Foundation), Properties, Chemical Resistant, Conductive, Conformal Coatings, Cryogenic, Dissipative, Dry Film Lubricating, Elastomeric, Friction Reducing, Heat Resistant, Hydrophilic, Hydrophobic, Impact Resistant, Insulative, Non-Stick, Protective, Scratch Resistant, UV Resistant, Experience with Virtually All Brands of Material. Authorized Applicator of these Brands: Custom Coatings, Halar® (ECTFE)[Ausimont], Kynar® (PVDF) [Arkema], Ryton® (PPS) [Phillips Chemicals], Teflon® (FEP, PFA, PTFE, ETFE, Silver Stone®, Teflon S®) [DuPont], Whitford Corp (Dykor®, PTFE, PFA, Xylan® Xylar® & Others). Substrates Coated: Depending on the coating selected, we can coat any substrate whether Metal or Plastic. Some examples are: Aluminum, Brass, Carbon, Copper, Gold, Graphite, Nickel, Nitinol, Silicon, Silicone, Silver, Stainless Steel, Steel, ABS, Delrin, LDPE, Melamine formaldehyde, PET, Phenolics, Polyamides (Nylons), Polycarbonates, Polyester, Polyetheretherketone (PEEK), Polyetherimide (Ultem), Polyethylene, Polypropylene, Polyurethanes, PPS, PVC, Rubber. Pretreatment: Wash, Rinse, Media Blasting (surface profiling), Micro Media Blasting (precision profiling) Testing Capabilities: Adhesion (ASTM D3359), Bio-Compatibility (thru outside Lab), Color (Boyd S10046), Dielectric Strength (Boyd S10123), Friction (thru outside Lab) (ASTM D1894), FTIR (thru outside Lab), Hardness (ASTM D3363), Hydrophobic contact angle (ASTM C813), Insulation Resistance (Boyd S10123), Microscopy (Boyd S10046), Porosity testing (Boyd S10124), Profiliometer (surface roughness) (Boyd S10046), Thickness (Boyd S10203), Topographcial & Structural using High Resolution Scanning Electron Microscopy (thru outside Lab), Viscosity (Boyd S10153). Special Notes: Boyd Coatings is a performance applicator & full service coater (surface-prep, primer, top-coat, & custom process) of all coating types including fluoropolymers, CARC, and Epoxies serving all industrial sectors, including Medical, Aerospace, & Military applications. Boyd Coatings is an ISO 9001:2008 certified, and licensed applicator for Teflon®, Whitford® & 3M®.