FABTECH 2013 - CHICAGO, IL
November 18 -21, 2013
CCAI FINISHING Pavilion at FABTECH
2013 Largest Show Yet; Registration Now Open
With more than six months until
FABTECH opens its doors in November at Chicago’s McCormick Place
CCAI’s FINISHING Pavilion is now the largest yet since CCAI became a
partner in the event in 2010.
“We are thrilled to have grown
so much,” states CCAI Executive Director Anne Goyer.
“Our growth has been twofold.
Past exhibitors are taking larger booths and we are signing up
new exhibitors that haven’t been in the FINISHING Pavilion before.
It’s exciting because it brings a wide variety of finishing
technologies to show goers.
We’ve already sold more space than any past shows and we expect
both our total exhibit space and number of exhibitors to exceed past
shows by 15-20%. We are
far ahead of previous years at this point in time, making our Pavilion
the largest show for industrial finishers in the U.S.”
In addition to the FINISHING
Pavilion expansion, the entire FABTECH show will be the largest ever.
As some areas of the show floor have already sold out, the
North hall has been expanded to add more space.
This year’s promotion campaign speaks to the heart of the show
and conference: FABTECH
gives attendees a 360 view of the most innovative technology &
processes. CCAI is happy
to have added finishing to bring the event full circle.
For those who haven’t taken
booth space yet, there is still some space available in the CCAI
FINISHING Pavilion, but at the rate space is selling, it won’t be
available for long. Anyone
wishing to participate as an exhibitor is encouraged to reserve space
now. Exhibitors receive
year long exposure through the show website and industry promotions.
To view the FABTECH floor plan, go to
Click on EXHIBIT/Reserve Space and then VIEW FLOORPLAN.
CCAI’s FINISHING Pavilion is located in the SOUTH HALL.
Scroll to the lower part of the floor plan to the FINISHING
area. Booths shaded in blue are
Scroll down the bottom of this page to view a list of current CCAI
Finishing Pavilion Exhibitors. Call Andy Goyer at CCAI with
questions regarding the FINISHING Pavilion: 941-373-1830.
Additionally, attendees can now register for the show and make hotel
FABTECH 2013 will be held on November 18-21 at McCormick Place in
The CCAI FINISHING Conference is in final development and will be
annouced early in the summer. It will once again feature
presentations on everything from liquid finishing to powder coating,
electrocoating to pretreatment, systems, curing and more.
Click here to view the FABTECH 2013 Prospectus.
Click here to view the FABTECH 2013 Floor Plan. Please
contact Andy Goyer at
firstname.lastname@example.org or 941-373-1830 to discuss the
available space for the FINISHING Pavilion at FABTECH 2013.
You can view the FINISHING Pavilion on the
overall FABTECH 2013 Floor Plan by click the link above and scrolling
to the bottom of the page below the red line. The red line is
just for delineation of sections on the floor plan and is not a
physical wall at the show. Please contact Andy Goyer at
email@example.com or 941-373-1830
to discuss the available space for the FINISHING Pavilion at FABTECH
Click here to download the FABTECH 2013 Exhibit
Contract and Space Selection Form. Please return by fax to
941-373-1828 hold your space.
Below is the list of
current 2013 FINISHING Pavilion Exhibitors.
Acme Finishing Co.
ACT Test Panels, LLC
Advanced Finishing USA
AFC Finishing Systems
Anest Iwata USA
Bronco Blast Equipment/Industrial Associates
Bulk Chemicals, Inc.
Caldan Conveyor A/S
Calvary Industries Inc.
Canadian Finishing & Coatings Mfg.
Cardinal Paint & Powder
Carpenter Chemicals, LC
Castrol Industrial N.A. - LubeCon
Catalytic Industrial Systems
Chemical Coaters Association Int'l.
Col-Met Spray Booths
Combustion and Systems, Inc.
Coral Chemical Co.
Custom Fabricating & Supplies
Decoral System USA
DeVilbiss, Ransburg, BGK, Binks
DuPont Industrial CoatingSolutions
Echo Engineering & Production Supplies, Inc.
Electro-Steam Generator Corp.
EXEL North America,
Fischer Technology Inc.
Flexovit USA Inc.
Equipment, div. of TPI Corp.
Paul N. Gardner Co., Inc.
General Automatic Transfer Co.
General Fabrications Corp.
Global Finishing Solutions LLC
IFS Coatings, Inc.
KMI Systems Inc.
Koch Filter Corp.
George Koch Sons, LLC
Magic Rack/Production Plus Corp.
Metal Finishing Magazine
Metcast / Blast Cleaning
Midwest Finishing Systems, Inc.
Mighty Hook Inc.
Northern Coatings & Chemical
Nova Verta USA
Paragon Laser Systems
Pneu-Mech Systems Mfg. LLC
Pollution Control Products Co.
Powder Coating Consultants
Powder Coating Magazine
Manufacturers Inc. (PEM, Inc.)
Products Finishing Magazine
Protech Powder Coatings
Red-Ray Mfg. Co., Inc.
Sata Spry Equipment
Southern Systems, Inc.
Spray-Tech / Junair
Uni-Spray Systems Inc.
VulkanBlast Shot Technology
Wagner Industrial Solutions
Walther Pilot N.A.
Zero Blast Cabinets, div. of Clemco Industries
= PLATINUM CORPORATE CCAI MEMBER
= GOLD CORPORATE CCAI MEMBER
= STANDARD CORPORATE CCAI MEMBER