Print Page   |   Sign In   |   Register
Keystone Koating
Profile Pages More
Photo Not Available
Custom Coater Contact: (1)
Groups
CCAI Members Only
Members Only
Chapters
Carolinas
Member
Custom Coater
Photos
Last updated: 8/7/2018
Keystone Koating
Custom Coater Membership -- Member: Custom Coater
Professional Information
Keystone Koating
295 Wood Corner Rd
Lititz
Pennsylvania
17522  United States
 [ Map ]
717 738-2148 (Phone)
717 738-7370 (Fax)
Visit Website »
  Powder - Thermoplastic, Powder - Thermoset
  Metal - Alloys, Metal - Aluminum, Metal - Cold Rolled Steel (CRS), Metal - Hot Rolled Steel (HRS), Metal - Iron, Metal - Stainless Steel
  Blasting - Automatic, Blasting - Manual, Pretreatment - Automatic Spray
  3
  84
  84
  216
  2000
  3
  36
  72
  240
  1200
  Adhesion, Film Thickness, Gloss, Hardness, Salt Spray
  Coatings Applied: Powder Coating.

Substrates Coated: Metal Substrates including Steel, aluminum, Iron and Aluminum castings, Stainless steel, and Galvanized Steel.

Pretreatment: 3 conveyorized lines with 8 stage pre-treat system using Iron Phosphate conversion coatings with RO rinsing and Dry in Place Seal.

Product Size: 36" wide x 72" tall x 20' long on conveyorized lines. Also have batch coating capabilities up to 84" wide x 84" tall x 18' long.

Testing capabilities:
Film Thickness
Gloss
ASTM B 177 Salt Fog Tests and evaluating the test panels according to ASTM D 1654
ASTM D 3359 Crosshatch Adhesion Test
ASTM D 6665 Boiling Water Test
PCI#8 Solvent Cure Test (MEK rub test)

Special Notes: Keystone Koating is able to coat architectural products to meet the American Architectural Manufactures Association (AAMA) 2604 and 2605 specification and is listed on the AAMA 2605 VCL and is an approved applicator for IFS Coatings and TCI Powder Coatings AAMA 2604 & AAMA 2605 coatings. In addition Keystone Koating is an approved applicator for JLG Industries and has been named a Product Finishing Top Shop four years in a row.

Keystone Koating provides additional value added services including but not limited to:
Steel shot, steel grit and Aluminum oxide blasting
Part masking (Protect machined or threaded area from getting coated)
Transportation
Packaging & Assembly
Warehousing
A quality assurance laboratory
Partnership with a steel service center that has capabilities in product design and development, laser cutting, and contract manufacturing
Two full service locations, One in Lititz, Pennsylvania and one in Mifflintown, Pennsylvania.
Additional Information